Crack Repair Products

PowerCOAT Canada is now offering 3 different types of crack repair products that can be used with our floor coating systems.

All have unique properties and depending on what your needs are these products will give you the options you want.

Read further for more information on these products and click the links to download the tech data sheets to learn more about how they are used.

PP-CF is a two part, high penetration, fast setting, hybrid polyurea for repairing and re-building damaged concrete. The product is a 1:1 ratio, easy to mix system that is 98 % solids and VOC compliant. The PP-CF can be used to set anchor bolts, repair damaged control joints, fill spalling, and rebuild vertical curbing and steps. Sand or gravel can be added to extend the volume of the material and act as filler for repairing large spalls, holes and cracks.

Click here to view the tech data sheet on this product

PRODUCT PROPERTIES

• Application temperature between 23°F to 100.4°F (-5°C to 38°C)

• Product cures in 10 minutes @ 71.6°F (22°C) with excellent adhesion

• Self-leveling and self-priming

• Ready to service in 10 to 20 minutes

• Easy to mix 1:1 ratio by volume

• Highly chemical resistance

• Excellent for industrial floor repairs subject to forklift traffic and harsh conditions

WHERE TO USE

• Commercial freezer repairs

• Aircraft hangar floors

• Low temperature equipment

• Maintenance facility floors

• Garage floors

• Industrial shop floors

• Car washes or wash bays

• Forming/ rebuilding stairs and steps

• Leveling and grade matching

• Bridge/ street repairs

• Concrete polishing and other coating applications

• Non-moving control joint fill

PPG FLR800 is a 2 part epoxy crack filler gel for repairing both horizontal and vertical cracks in concrete.

Click here to view the tech data sheet on this product

PRODUCT PROPERTIES

• Can be applied thicker for horizontal surfaces

• Can be top-coated with epoxy immediately after application

• 100% Solids, Ultra-Low VOC (<11 g/L)

• Self-priming

• Easy to mix 1:1 ratio by volume

• Excellent chemical resistance

• Surface application temperature should be between 55°F (13°C) and 95°F (35°C)

• Low Odor

WHERE TO USE

• Aircraft hangar floors

• Maintenance facility floors

• Garage floors

• Industrial shop floors

• Concrete polishing and other coating applications

• Non-moving control joint fill

Top Gun 400 Elastomeric Acrylic Urethane Sealant is made with Kevlar® for exceptional strength and durability. This premium technology has superior adhesion to most building substrates with greater than 800% elongation. It is an internally plasticized sealant that reduces dirt pickup, eliminates yellowing and shiners. It forms a permanently flexible, airtight, water-resistant seal offering exceptional protection from environmental conditions. Effective on wood, drywall, plastic, metal, brick, masonry, stucco/EIFS, marble, glass, porcelain and ceramic tile.

Click here to view the tech data sheet on this product

PRODUCT PROPERTIES

• Lifetime Limited Warranty

• Super Adhesion

• Permanent Flexibility

• Internally Plasticized

• Excellent Paintability

• Interior/Exterior

• Cured Caulk is Mildew Resistant

• Exceeds ASTM C920, Class 25

WHERE TO USE

• Crown Molding

• Windows and Doors

• Baseboards

• Pipes and Vents

• Siding and Trim

• Sinks and Counters

• Expansion and Control Joints up to 2” x ½”