Jiffy Mixer PS-1 20.5" Shaft

Made of 304 polished stainless steel, the PS-1 model is designed for heavy duty jobs in 5-10 gal. (20-40 qt.) containers. It easily fits any 1/2″ electric chucked power tool.

The PS-1 model is designed for a max speed of 800 RPMS.  Tools with 450-750 RPMS get the best rate of thorough mixing.  MIxers can be permanently installed if desired.

The PS model is designed for large to heavy size jobs in a container up to 100 gallons. All purpose, heavy duty and efficient. Easily mixes adhesives, cement, mortar, paints, resins, polyester gel-coats, slurry, zinc rich materials or any other tough-to-mix job. Easily fits any ½” electric chucked power tool.

Constructed of Stainless Steel 304.

Jiffy Mixer is an all purpose, heavy duty, extremely efficient industrial/commercial mixer.

It is designed to quickly and thoroughly mix dense and viscous substances in an open container. It eliminates waste and unwanted aeration of materials in addition to cutting mixing time up to 90%. It is equally effective with liquids, dry materials, liquid and dry materials combined, or multiple component materials. Made of stainless steel 304, its patented construction and design is for mixing, not just stirring.

It’s various sizes fit standard 1/4″, 3/8″, 1/2″, 3/4″ chucked power tools. It has two sets of specially welded blades. The vertical ones keep the mixing action between them, the horizontal ones employ an exclusive hydraulic-glow principle that prevents sucking air. In addition, the horizontal blades pull the high density material up from the bottom while forcing the low viscosity solvents down from the top. The leading edge of the lower horizontal blade will scrape the bottom of the mixing container to bring all settled material particles into the mixing unit.

No Splashing-Submerge mixer into materials to be mixed before starting motor; shut motor off before allowing mixing unit to reach surface of the mixed materials.

Will not draw in air -The exclusive hydraulic-flow action of the horizontal blades force just the materials from the upper and lower areas of the container into the mixer.

Thorough Mixing-The two vertical blades keep the main mixing action inside the unit, thus increasing the efficiency of the horizontal blades by exerting pressure on the materials being mixed.

Fast Mixing – Cuts time up to 90%- A 5 gallon can of separated paint can be thoroughly mixed and blended in about 60 seconds.

Special Weld Construction-Made entirely of rugged stainless steel 304, all stress joints are specially welded for extra strength so it is virtually impossible for them to break even when mixing extremely heavy materials such as slurry and mud.

Puncture-Proof/Safe Operation-The exclusive patented protective ring design prevents puncture or damage to the walls of the mixing containers. It also prevents the breaking or bending of the horizontal blades. In addition, the ring eliminates accidents should the mixer be accidentally started outside of a container.

Quick, Easy, Cleanup-Just rotate mixer in appropriate thinner or solvent.

MADE OF STAINLESS STEEL 304