Industrial

RESISTANT FLOOR

Epoxies have proven their ability to resist the worst uses for a floor in the past decades because they are easy to clean, seamless, impermeable, non-bacterial and chemical resistant. The POWERPOXY-100 is a great product for industrial flooring. Plus, its available in a few variations of formulas like low temperature application, fast cure and aggressive chemical resistant. These systems can be tinted in a large variety of colors

SYSTEM 1 Solid color system. This is the standard system it shows great abrasion resistance, adhesion and its very easy to clean.
LAYER	THICKNESS	EPOXY SERIES
PRIMER	8 Mils (200 SQF/GAL)	POWERPOXY 100
TOPCOAT	8 Mils (200 SQF/GAL)	POWERPOXY 100

NOTE : Silica sand can be used in full broadcast in the basecoat to give more perforation resistance. Silica sand can be used in partial broadcast into the topcoat to give an anti-slip finish. The standard grit for the silica sand is 32 to 40.

NOTE : Silica sand can be used in full broadcast in the basecoat to give more perforation resistance. Silica sand can be used in partial broadcast into the topcoat to give an anti-slip finish. The standard grit for the silica sand is 32 to 40.