This product cannot be shipped by courier. It can only be shipped via common carrier on a pallet or picked up at our warehouse.
To obtain a quote for shipping on a common carrier, please email us at info@powercoatcanada.com or call our office at 1-877-953-7733 or (780) 718-2628.
PE-100 is a solvent-less, two-component epoxy coating system. It exhibits very good appearance and chemical and physical properties.
ADVANTAGES
- Dense surface resistant to bacteria and moisture and easy to clean.
- May apply several layers on itself with excellent adhesion.
- Contains no solvent with a very low VOC content (VOC = 75.4 g/liters), allowing for interior application without harmful odors.
- Excellent adhesive properties, allowing application on other firm and hard coatings, as well as a good bond to the substrate.
Available in Clear, Medium Gray, Light Gray, Almond
TECHNICAL DATA
| PACKAGING | 3 US gal (11.35 L) |
| COLOR | PART A: Clear PART B: Clear to amber |
| RECOMMENDED THICKNESS (SOLID COLOR) | PRIMER (PE-100): 10 mils (150 ft²/gal) FINISH COAT (PE-100): 16 mils (100 ft²/gal) |
| RECOMMENDED THICKNESS (FLAKES SYSTEM) | PRIMER (PE-100): 10 mils (150 ft²/gal) FINISH COAT (PE-100): 13 mils (120 ft²/gal) |
| RECOMMENDED THICKNESS (METALLIC SYSTEM) | PRIMER (PE-100): 10 mils (150 ft²/gal) FINISH COAT (PE-100): 40 mils (40 ft²/gal) |
| SHELF LIFE | 12 months in original unopened factory-sealed containers. Keep away from extreme cold, heat, or moisture. Keep out of direct sunlight and away from fire hazards. |
| MIX RATIO, BY VOLUME | A:B = 2:1 |
| MIX RATIO, BY WEIGHT | Clear: A:B = 100:41-48 Colors: A:B = 100:39-45 With quartz sand: A:B = 100:50 Mixture = 200 |
| POT LIFE 16 OZ (454 G) | 10-15 minutes @ 77°F (25°C) |
| WORKING TIME | 40 minutes |
| VOC (G/L) | 75.4 g/L |
| IMPORTANT NOTE: PROPERTIES @ 73°F (23°C) and 50% R.H. Times are approximate and will be affected by changing ambient conditions, especially changes in temperature and relative humidity. The indicated mileage is calculated for flat surfaces. A porous or imperfect surface will require more material in order to cover the same mileage. | |