Jiffy Mixer LM – 10.25" Stainless Steel Drill Mixer

Heavy Duty Industrial Mixer for Small Pails & Pint-Sized Containers

The Jiffy Mixer LM is a compact, heavy-duty industrial mixer built for small-batch mixing in pint-sized containers. Made entirely of 304 polished stainless steel with specially welded stress joints, this mixer is virtually indestructible — even when working with dense, viscous materials like epoxy, polyaspartic, slurry, and multi-component coatings.

Fits any 1/4" electric chucked power tool. Optimal performance at 450–750 RPM; maximum 1,200 RPM. Shaft measures 10.5" x 1.25" mixer end width. Can be permanently installed if desired.

How It Works

The Jiffy Mixer uses a patented two-blade system — vertical blades keep the mixing action contained within the unit for maximum efficiency, while horizontal blades use an exclusive hydraulic-flow principle that prevents air entrainment. The horizontal blades simultaneously pull dense material up from the bottom and force low-viscosity solvents down from the top, while the leading edge scrapes the bottom of the container to bring all settled particles into the mix.

Key Features

• Cuts mixing time up to 90% — a 5-gallon pail of separated paint mixes thoroughly in about 60 seconds
• No splashing — submerge before starting; shut off before surfacing
• Will not draw in air — hydraulic-flow blade action prevents aeration of materials
• Thorough mixing — dual-blade system ensures complete blending of dense and viscous substances
• Scrapes the bottom — leading edge of lower blade brings all settled material into the mix
• Puncture-proof ring design — patented protective ring prevents container wall damage and blade bending
• 304 stainless steel construction — corrosion resistant, chemically compatible, and built for repeated industrial use
• Quick, easy cleanup — rotate in appropriate thinner or solvent

Performance & ROI

• 90% faster mixing — spend less time mixing and more time applying
• Better mix quality — thorough blending reduces soft spots, adhesion failures, and colour inconsistencies
• Zero waste — scrapes the bottom and corners so every drop of product gets used
• No aeration — prevents bubbles in your coating caused by air entrainment during mixing
• Works with epoxy, polyaspartic, paint, slurry, and multi-component systems

Specifications: Shaft: 10.5" long x 1.25" mixer end width. Chuck: 1/4". Max speed: 1,200 RPM. Optimal: 450–750 RPM. Material: 304 polished stainless steel.