The POWERFLAKES® floor system is composed of a selection of randomly shaped vinyl chips, available in many standard colors. These can be customized by choosing different colors and sizes to accent any room. The vinyl chips provide not only a pleasing palette of color but also add a measure of slip resistance to the surface.
POWERFLAKES® system creates a vibrant, seamless, resilient surface from plain gray concrete. Although the system is simple both in composition and installation, it yields an exceptionally durable and long lasting floor.
POWERCOAT products provide the structure and strength of the system. Due to these properties, POWERFLAKES® floor system is used for garage floors, commercial kitchens, locker rooms, sports venues, automotive showrooms, veterinarian clinics, laundromats, or anywhere that an exceedingly resilient floor is required.
SYSTEM 1
LAYER
THICKNESS
EPOXY SERIES
BASECOAT
8 Mils
POLYMER CHIPS
FLAKES
6-8 SQF/LBS
POLYMER CHIPS
TOPCOAT
12 to 16 Mils
POWERFAST
NOTE : Flakes can be replaced by quartz in the POWERFLAKES® SYSTEM. The rate of application of quartz in 8 mils thickness is 1-2 pounds per SQF.
SYSTEM 2
LAYER
THICKNESS
EPOXY SERIES
PRIMER
8 Mils
POWERPOXY 100
BASECOAT
8 Mils
POWERPOXY 100
FLAKES
6-8 SQF/LBS
POLYMER CHIPS
TOPCOAT
12 to 16 Mils
POWERPOXY 100
NOTE : Flakes can be replaced by quartz in the POWERFLAKES® SYSTEM. The rate of application of quartz in 8 mils thickness is 1-2 pounds per SQF.
SYSTEM 3
LAYER
THICKNESS
EPOXY SERIES
PRIMER
8 Mils
POWERFAST
BASECOAT
8 Mils
POWERFAST
FLAKES
6-8 SQF/LBS
POLYMERS CHIPS
MIDDLECOAT
30 Mils
POWERFAST
FLAKES
6-8 SQF/LBS
POLYMER CHIPS
TOPCOAT
30 Mils
POWERFAST
NOTE : Flakes can be replaced by quartz in the POWERFLAKES® SYSTEM. The rate of application of quartz in 8 mils thickness is 1-2 pounds per SQFT.
By continuing use this site, you agree to the Privacy Policy