Poly StraightJacket Mesh Tape
POLYSTRAIGHTJACKETMESHTAPE
18 En stock En rupture de stock 18
Share
Straight Jacket Fiberglass Mesh Tape
Straight Jacket Tape is a fiberglass mesh reinforcement tape used in fire-rated Polydeck® decking systems. It provides excellent reinforcement for cracks, joints, seams, flashings and other high-stress areas on concrete and plywood.
This off-white fiberglass mesh tape comes in 4-inch × 150-foot rolls, with individual rolls and cases of 18 available to suit different project requirements.
Deck Reinforcement for Critical Details
When detailing a concrete or plywood deck, joints and transitions deserve careful attention. Straight Jacket Tape provides targeted reinforcement at these stress areas as part of the specified Polydeck® decking system.
Performance and Project Value
- Reinforce high-stress areas: Fiberglass mesh provides excellent reinforcement for cracks, seams, joints and flashings.
- Support system-specific detailing: Used in fire-rated Polydeck® decking systems. Follow the specified system requirements for installation.
- Plan material quantities: Each roll supplies 150 linear feet of 4-inch-wide tape to help estimate reinforcement needs.
- Purchase for the job size: Choose individual rolls or cases of 18 rolls to match project scope.
Typical Uses
- Concrete
- Cracks
- Flashings
- Joints
- Other High Stress Areas
- Plywood
- Seams
Colour, Roll Size and Packaging
- Colour: Off-White
- Single rolls: 4 inches × 150 feet (10.16 cm × 45.7 m)
- Sold individually or in cases of 18 rolls
Technical Data
- Coverage per roll, length, observed: 150 ft / 45.7 meters
- Thickness, observed: 0.007 inches / 0.18 mm
- Average weight, observed: 1.9 oz/sqy / 64.4 gm/sqm
- Tensile Strength, ASTM D1668 ll: Warp 85 psi (0.6 Mpa); Fill 85 psi (0.6 Mpa)
- Thread, ASTM D1668 ll: Warp 20; Fill 20
- Yarn, ASTM D1668 ll: Warp 150-1/0; Fill 150-1/0
