{"title":"PPG","description":"\u003ch1\u003ePPG Industrial Coatings \u0026amp; Protective Finishes | Trusted Performance\u003c\/h1\u003e\n\u003cp\u003eExplore our selection of \u003cstrong\u003ePPG industrial coatings and protective finishes\u003c\/strong\u003e — engineered for demanding commercial and industrial environments where durability, chemical resistance, and long-term protection are non-negotiable. PPG is a globally trusted brand backed by decades of coating innovation.\u003c\/p\u003e","products":[{"product_id":"ppg-amerlock-2-safety-yellow-epoxy-kit","title":"PPG Amerlock 2\/400 Safety Yellow Epoxy Kit AK2-81\/01 – 2 Gallon 2-Component","description":"\u003ch1\u003ePPG Amerlock 2\/400 – Safety Yellow 2-Component Epoxy Kit\u003c\/h1\u003e\n\u003ch2\u003eHigh-Build Industrial Epoxy Coating | Direct-to-Rust | NSF 61 Potable Water Approved\u003c\/h2\u003e\n\u003cp\u003ePPG Amerlock 2\/400 is a high-solids, high-build epoxy protective coating that has set the standard for industrial, marine, and offshore corrosion protection worldwide. This complete \u003cstrong\u003e2-component epoxy kit (2 gallons)\u003c\/strong\u003e in Safety Yellow delivers fast dry times, low-temperature cure capability, superior chemical resistance, and the ability to apply directly over tightly adhering rust and old paint — without blast cleaning.\u003c\/p\u003e\n\u003cp\u003eSafety Yellow is ideal for high-visibility marking of safety zones, equipment, floor lines, and hazard areas in industrial and commercial facilities.\u003c\/p\u003e\n\u003ch3\u003eKey Performance Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFast dry time\u003c\/strong\u003e — dry to touch in as few as 2 hours at 70°F (21°C); recoat in 3 hours\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLow-temperature cure\u003c\/strong\u003e — cures down to 0°F (-18°C) for year-round application in cold climates\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDirect-to-rust application\u003c\/strong\u003e — applies over tightly adhering rust and intact old paint without blast cleaning\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMinimal surface preparation\u003c\/strong\u003e — proprietary penetrants and surface tension-control agents create a tight bond even on difficult surfaces\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLeast odour in class\u003c\/strong\u003e — low-solvent formula minimizes odour during application\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh-solids, high-build\u003c\/strong\u003e — thick film build in fewer coats for maximum protection efficiency\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSuperior chemical resistance\u003c\/strong\u003e — resists weather, moisture, sunlight, and chemical fumes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDirect-to-metal\u003c\/strong\u003e — excellent adhesion on new, unpainted metal surfaces\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCompliance \u0026amp; Certifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eANSI\/NSF 61 approved\u003c\/strong\u003e — certified for immersion in potable water tanks, pipes, valves, and fittings\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUSDA incidental food contact compliant\u003c\/strong\u003e — suitable for food processing and agricultural environments\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFDA direct food contact\u003c\/strong\u003e — meets FDA requirements for direct food contact applications\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVOC compliant\u003c\/strong\u003e — meets existing VOC regulations\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTypical Applications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSafety zone and hazard area marking in industrial facilities\u003c\/li\u003e\n\u003cli\u003eHigh-visibility floor line and equipment marking\u003c\/li\u003e\n\u003cli\u003ePotable water tanks, pipes, valves, and fittings\u003c\/li\u003e\n\u003cli\u003eIndustrial and marine steel structures\u003c\/li\u003e\n\u003cli\u003eFood processing facilities and agricultural equipment\u003c\/li\u003e\n\u003cli\u003eDirect-to-metal coating on new unpainted surfaces\u003c\/li\u003e\n\u003cli\u003eOvercoating tightly adhering rust and old paint\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePerformance \u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eNo blast cleaning required\u003c\/strong\u003e — apply over rust and old paint, dramatically reducing surface prep cost and time\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFast recoat\u003c\/strong\u003e — 3-hour recoat window keeps multi-coat systems moving efficiently\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCold weather capable\u003c\/strong\u003e — cure down to 0°F extends the application season year-round\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMulti-environment certified\u003c\/strong\u003e — NSF 61, USDA, and FDA compliance opens up water, food, and industrial project opportunities in one product\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible with PPG system products\u003c\/strong\u003e — pairs with AMERCOAT® 450 series and PSX® products for complete asset protection systems\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eKit Contents:\u003c\/strong\u003e Complete 2-component epoxy kit – 2 gallons total (Component A + Component B). Colour: Safety Yellow.\u003c\/p\u003e","brand":"PPG","offers":[{"title":"Default Title","offer_id":45508190896298,"sku":"PPGAK2-81\/01K","price":279.65,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0582\/4371\/1146\/files\/Amerlock2400SafetyYellow1979ResinKitWEB.png?v=1769806672"},{"product_id":"ppg-amerlock-2-400-pearl-gray-epoxy-kit","title":"PPG Amerlock 2\/400 Pearl Gray Epoxy Kit – 2 Gallon 2-Component","description":"\u003ch1\u003ePPG Amerlock 2\/400 – Pearl Gray 2-Component Epoxy Kit\u003c\/h1\u003e\n\u003ch2\u003eHigh-Build Industrial Epoxy Coating | Direct-to-Rust | NSF 61 Potable Water Approved\u003c\/h2\u003e\n\u003cp\u003ePPG Amerlock 2\/400 is a high-solids, high-build epoxy protective coating that has set the standard for industrial, marine, and offshore corrosion protection worldwide. This complete \u003cstrong\u003e2-component epoxy kit (2 gallons)\u003c\/strong\u003e delivers fast dry times, low-temperature cure capability, superior chemical resistance, and the ability to apply directly over tightly adhering rust and old paint — without blast cleaning.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e⚠️ Winter Shipping Notice:\u003c\/strong\u003e This product is temperature-sensitive and requires heated shipping during colder months.\u003c\/p\u003e\n\u003ch3\u003eKey Performance Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFast dry time\u003c\/strong\u003e — dry to touch in as few as 2 hours at 70°F (21°C); recoat in 3 hours\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLow-temperature cure\u003c\/strong\u003e — cures down to 0°F (-18°C) for year-round application in cold climates\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDirect-to-rust application\u003c\/strong\u003e — applies over tightly adhering rust and intact old paint without blast cleaning\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMinimal surface preparation\u003c\/strong\u003e — proprietary penetrants and surface tension-control agents create a tight bond even on difficult surfaces\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLeast odor in class\u003c\/strong\u003e — low-solvent formula minimizes odor during application\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh-solids, high-build\u003c\/strong\u003e — thick film build in fewer coats for maximum protection efficiency\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSuperior chemical resistance\u003c\/strong\u003e — resists weather, moisture, sunlight, and chemical fumes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDirect-to-metal\u003c\/strong\u003e — excellent adhesion on new, unpainted metal surfaces\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCompliance \u0026amp; Certifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eANSI\/NSF 61 approved\u003c\/strong\u003e — certified for immersion in potable water tanks, pipes, valves, and fittings\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUSDA incidental food contact compliant\u003c\/strong\u003e — suitable for food processing and agricultural environments\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFDA direct food contact\u003c\/strong\u003e — meets FDA requirements for direct food contact applications\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVOC compliant\u003c\/strong\u003e — meets existing VOC regulations\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTypical Applications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePotable water tanks, pipes, valves, and fittings\u003c\/li\u003e\n\u003cli\u003eIndustrial and marine steel structures\u003c\/li\u003e\n\u003cli\u003eOffshore and coastal environments\u003c\/li\u003e\n\u003cli\u003eFood processing facilities and agricultural equipment\u003c\/li\u003e\n\u003cli\u003eDirect-to-metal coating on new unpainted surfaces\u003c\/li\u003e\n\u003cli\u003eOvercoating tightly adhering rust and old paint\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePerformance \u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eNo blast cleaning required\u003c\/strong\u003e — apply over rust and old paint, dramatically reducing surface prep cost and time\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFast recoat\u003c\/strong\u003e — 3-hour recoat window keeps multi-coat systems moving efficiently\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCold weather capable\u003c\/strong\u003e — cure down to 0°F extends the application season year-round\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMulti-environment certified\u003c\/strong\u003e — NSF 61, USDA, and FDA compliance opens up water, food, and industrial project opportunities in one product\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible with PPG system products\u003c\/strong\u003e — pairs with AMERCOAT® 450 series and PSX® products for complete asset protection systems\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eKit Contents:\u003c\/strong\u003e Complete 2-component epoxy kit – 2 gallons total (Component A + Component B). Colour: Pearl Gray.\u003c\/p\u003e","brand":"PPG","offers":[{"title":"Default Title","offer_id":45509737119914,"sku":"PPGAK2-23\/01K","price":277.5,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0582\/4371\/1146\/files\/Amerlock_2_400_Pearl_Grey_Resin_Kit_WEB_revised_a51785c9-0210-42ff-8df1-b39d45ab10fe.png?v=1780506749"},{"product_id":"ppg-amerlock-2-white-epoxy-kit","title":"PPG Amerlock 2\/400 White Epoxy Kit AK2-3\/01 – 2 Gallon 2-Component","description":"\u003ch1\u003ePPG Amerlock 2\/400 – White 2-Component Epoxy Kit\u003c\/h1\u003e\n\u003ch2\u003eHigh-Build Industrial Epoxy Coating | Direct-to-Rust | NSF 61 Potable Water Approved\u003c\/h2\u003e\n\u003cp\u003ePPG Amerlock 2\/400 is a high-solids, high-build epoxy protective coating that has set the standard for industrial, marine, and offshore corrosion protection worldwide. This complete \u003cstrong\u003e2-component epoxy kit (2 gallons)\u003c\/strong\u003e delivers fast dry times, low-temperature cure capability, superior chemical resistance, and the ability to apply directly over tightly adhering rust and old paint — without blast cleaning.\u003c\/p\u003e\n\u003ch3\u003eKey Performance Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFast dry time\u003c\/strong\u003e — dry to touch in as few as 2 hours at 70°F (21°C); recoat in 3 hours\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLow-temperature cure\u003c\/strong\u003e — cures down to 0°F (-18°C) for year-round application in cold climates\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDirect-to-rust application\u003c\/strong\u003e — applies over tightly adhering rust and intact old paint without blast cleaning\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMinimal surface preparation\u003c\/strong\u003e — proprietary penetrants and surface tension-control agents create a tight bond even on difficult surfaces\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLeast odour in class\u003c\/strong\u003e — low-solvent formula minimizes odour during application\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh-solids, high-build\u003c\/strong\u003e — thick film build in fewer coats for maximum protection efficiency\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSuperior chemical resistance\u003c\/strong\u003e — resists weather, moisture, sunlight, and chemical fumes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDirect-to-metal\u003c\/strong\u003e — excellent adhesion on new, unpainted metal surfaces\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCompliance \u0026amp; Certifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eANSI\/NSF 61 approved\u003c\/strong\u003e — certified for immersion in potable water tanks, pipes, valves, and fittings\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUSDA incidental food contact compliant\u003c\/strong\u003e — suitable for food processing and agricultural environments\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFDA direct food contact\u003c\/strong\u003e — meets FDA requirements for direct food contact applications\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVOC compliant\u003c\/strong\u003e — meets existing VOC regulations\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTypical Applications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePotable water tanks, pipes, valves, and fittings\u003c\/li\u003e\n\u003cli\u003eIndustrial and marine steel structures\u003c\/li\u003e\n\u003cli\u003eOffshore and coastal environments\u003c\/li\u003e\n\u003cli\u003eFood processing facilities and agricultural equipment\u003c\/li\u003e\n\u003cli\u003eDirect-to-metal coating on new unpainted surfaces\u003c\/li\u003e\n\u003cli\u003eOvercoating tightly adhering rust and old paint\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePerformance \u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eNo blast cleaning required\u003c\/strong\u003e — apply over rust and old paint, dramatically reducing surface prep cost and time\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFast recoat\u003c\/strong\u003e — 3-hour recoat window keeps multi-coat systems moving efficiently\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCold weather capable\u003c\/strong\u003e — cure down to 0°F extends the application season year-round\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMulti-environment certified\u003c\/strong\u003e — NSF 61, USDA, and FDA compliance opens up water, food, and industrial project opportunities in one product\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible with PPG system products\u003c\/strong\u003e — pairs with AMERCOAT® 450 series and PSX® products for complete asset protection systems\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eKit Contents:\u003c\/strong\u003e Complete 2-component epoxy kit – 2 gallons total (Component A + Component B). Color: White.\u003c\/p\u003e","brand":"PPG","offers":[{"title":"Default Title","offer_id":45509796004010,"sku":"PPGAK2-3\/01K","price":277.5,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0582\/4371\/1146\/files\/PPG_Amerlock_2_400_White_Resin_Kit_WEB_Revised.png?v=1780505463"},{"product_id":"ppg-amerlock-2-black-epoxy-kit","title":"PPG Amerlock 2\/400 Black Epoxy Kit AK2-9\/01 – 2 Gallon 2-Component","description":"\u003ch1\u003ePPG Amerlock 2\/400 – Black 2-Component Epoxy Kit\u003c\/h1\u003e\n\u003ch2\u003eHigh-Build Industrial Epoxy Coating | Direct-to-Rust | NSF 61 Potable Water Approved\u003c\/h2\u003e\n\u003cp\u003ePPG Amerlock 2\/400 is a high-solids, high-build epoxy protective coating that has set the standard for industrial, marine, and offshore corrosion protection worldwide. This complete \u003cstrong\u003e2-component epoxy kit (2 gallons)\u003c\/strong\u003e delivers fast dry times, low-temperature cure capability, superior chemical resistance, and the ability to apply directly over tightly adhering rust and old paint — without blast cleaning.\u003c\/p\u003e\n\u003ch3\u003eKey Performance Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFast dry time\u003c\/strong\u003e — dry to touch in as few as 2 hours at 70°F (21°C); recoat in 3 hours\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLow-temperature cure\u003c\/strong\u003e — cures down to 0°F (-18°C) for year-round application in cold climates\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDirect-to-rust application\u003c\/strong\u003e — applies over tightly adhering rust and intact old paint without blast cleaning\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMinimal surface preparation\u003c\/strong\u003e — proprietary penetrants and surface tension-control agents create a tight bond even on difficult surfaces\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLeast odour in class\u003c\/strong\u003e — low-solvent formula minimizes odour during application\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh-solids, high-build\u003c\/strong\u003e — thick film build in fewer coats for maximum protection efficiency\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSuperior chemical resistance\u003c\/strong\u003e — resists weather, moisture, sunlight, and chemical fumes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDirect-to-metal\u003c\/strong\u003e — excellent adhesion on new, unpainted metal surfaces\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCompliance \u0026amp; Certifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eANSI\/NSF 61 approved\u003c\/strong\u003e — certified for immersion in potable water tanks, pipes, valves, and fittings\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUSDA incidental food contact compliant\u003c\/strong\u003e — suitable for food processing and agricultural environments\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFDA direct food contact\u003c\/strong\u003e — meets FDA requirements for direct food contact applications\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVOC compliant\u003c\/strong\u003e — meets existing VOC regulations\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTypical Applications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePotable water tanks, pipes, valves, and fittings\u003c\/li\u003e\n\u003cli\u003eIndustrial and marine steel structures\u003c\/li\u003e\n\u003cli\u003eOffshore and coastal environments\u003c\/li\u003e\n\u003cli\u003eFood processing facilities and agricultural equipment\u003c\/li\u003e\n\u003cli\u003eDirect-to-metal coating on new unpainted surfaces\u003c\/li\u003e\n\u003cli\u003eOvercoating tightly adhering rust and old paint\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePerformance \u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eNo blast cleaning required\u003c\/strong\u003e — apply over rust and old paint, dramatically reducing surface prep cost and time\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFast recoat\u003c\/strong\u003e — 3-hour recoat window keeps multi-coat systems moving efficiently\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCold weather capable\u003c\/strong\u003e — cure down to 0°F extends the application season year-round\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMulti-environment certified\u003c\/strong\u003e — NSF 61, USDA, and FDA compliance opens up water, food, and industrial project opportunities in one product\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible with PPG system products\u003c\/strong\u003e — pairs with AMERCOAT® 450 series and PSX® products for complete asset protection systems\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eKit Contents:\u003c\/strong\u003e Complete 2-component epoxy kit – 2 gallons total (Component A + Component B). Colour: Black.\u003c\/p\u003e","brand":"PPG","offers":[{"title":"Default Title","offer_id":45510055133354,"sku":"PPGAK2-9\/01K","price":222.25,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0582\/4371\/1146\/files\/Amerlock_2-400_Black_WEB_Revised.jpg?v=1780506354"},{"product_id":"durethane-dtm-black-component-a-95-3314-01-1-gallon","title":"Durethane DTM Urethane Black Kit - 95-3314\/01 - 1 Gallon Kit","description":"\u003ch1\u003eDurethane DTM Urethane Black Kit – Direct-to-Metal Protection\u003c\/h1\u003e\u003ch2\u003eTwo-Component Urethane Mastic Built for Bare Metal \u0026amp; Tightly Adhering Rust\u003c\/h2\u003e\u003ch3\u003eLow VOC, HAPs-Free, SSPC Paint 36 Level 3 Compliant – 1 Gallon Kit\u003c\/h3\u003e\u003cp\u003eDurethane DTM 95-3314 is a two-component direct-to-metal urethane mastic coating engineered for high-performance protection on bare steel, previously coated surfaces, and even tightly adhering rust — no primer required. Combining the durability of a urethane topcoat with the adhesion of a mastic, Durethane DTM simplifies your coating system without compromising protection.\u003c\/p\u003e\u003cp\u003eLow VOC, free of organic HAPs, and compliant with SSPC Paint 36 Level 3, this coating meets the toughest environmental and specification requirements for industrial and commercial projects. Apply by spray, roller, or brush for a high-gloss finish with excellent long-term colour and gloss retention.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDirect-to-metal application\u003c\/strong\u003e — bonds to bare steel and tightly adhering rust without a separate primer coat\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo-component urethane mastic\u003c\/strong\u003e — delivers superior adhesion, toughness, and long-term corrosion resistance\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExcellent colour \u0026amp; gloss retention\u003c\/strong\u003e — urethane chemistry resists UV degradation, chalking, and colour fade\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLow VOC formula\u003c\/strong\u003e — meets stringent emissions requirements for industrial and regulated environments\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContains no organic HAPs\u003c\/strong\u003e — safer for applicators and compliant with air quality regulations\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSSPC Paint 36 Level 3 compliant\u003c\/strong\u003e — meets industry specification standards for high-performance industrial coatings\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVersatile application\u003c\/strong\u003e — spray, roller, or brush with infinite colour capability including safety and custom colours\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cem\u003eComplete 2-component kit includes Part A (Resin) and Part B (Hardener). Refer to the Durethane DTM Technical Data Sheet for mix ratios, surface preparation, and recoat requirements.\u003c\/em\u003e\u003c\/p\u003e","brand":"PPG","offers":[{"title":"Default Title","offer_id":45510382878890,"sku":"PPG95-3314\/01K","price":186.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0582\/4371\/1146\/files\/DurathaneDTMBlackKitWEB.png?v=1770321964"},{"product_id":"pitthane-ultra-aliphatic-urethane-neutral-clear-component-a-95-8000-01-1-gallon","title":"Pitthane Ultra Aliphatic Urethane Neutral\/Clear Kit - 95-8000\/01 - 1 Gallon Kit","description":"\u003ch1\u003ePPG Pitthane Ultra Aliphatic Urethane – High-Build Semi-Gloss Coating Kit\u003c\/h1\u003e\u003ch2\u003eIndustrial-Grade Urethane Protection with Lasting Color \u0026amp; Gloss\u003c\/h2\u003e\u003cp\u003ePitthane Ultra High Build Semi-Gloss is a premium 2-component aliphatic polyurethane coating engineered for industrial and commercial surfaces where long-term color retention, UV resistance, and a refined semi-gloss finish are non-negotiable.\u003c\/p\u003e\u003cp\u003eFormulated with a 2.8 VOC rating and extended pot life, this high-performance urethane delivers a durable, protective film that resists chalking, fading, and environmental degradation — even in high-exposure environments.\u003c\/p\u003e\u003cp\u003eAvailable in white and neutral\/clear bases with infinite color capability through the PERFORMACOLOR® tint system, Pitthane Ultra adapts to virtually any project specification. Apply by brush, roller, or spray for consistent, professional results every time.\u003c\/p\u003e\u003ch3\u003eWhy Choose Pitthane Ultra for Industrial Surfaces?\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSuperior Color \u0026amp; Gloss Retention\u003c\/strong\u003e — Aliphatic chemistry resists UV-induced chalking and fading, keeping surfaces looking sharp longer\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFast Dry Time\u003c\/strong\u003e — Dry to handle in ~5.5 hours; accelerate to ~55 minutes with optional accelerator to reduce downtime\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh-Build Formula\u003c\/strong\u003e — Achieves excellent film thickness per coat, reducing the number of coats needed\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVersatile Application\u003c\/strong\u003e — Brush, roll, or spray for consistent coverage on a wide range of industrial and commercial substrates\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLow VOC (2.8)\u003c\/strong\u003e — Meets stringent environmental compliance standards without sacrificing performance\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInfinite Color Options\u003c\/strong\u003e — Compatible with PERFORMACOLOR® tint system for precise color matching\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExtended Pot Life\u003c\/strong\u003e — More working time per mix means less waste and greater application control\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2-Component System\u003c\/strong\u003e — Catalyzed urethane chemistry delivers a harder, more chemical-resistant finish than single-component alternatives\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFast-Dry Formula Built for Demanding Environments\u003c\/h3\u003e\u003cp\u003eWith a dry-to-handle time of approximately 5.5 hours — or as little as 55 minutes with accelerator — Pitthane Ultra minimizes project downtime without compromising film integrity.\u003c\/p\u003e\u003ch3\u003eInfinite Color Capability with PERFORMACOLOR® Tint System\u003c\/h3\u003e\u003cp\u003eAvailable in white and neutral\/clear bases, this low VOC urethane coating offers unlimited color matching through the PERFORMACOLOR® system, making it ideal for brand-specific or specification-driven projects.\u003c\/p\u003e\u003ch3\u003eApplication Flexibility: Brush, Roll, or Spray\u003c\/h3\u003e\u003cp\u003eWhether you're coating structural steel, concrete, or equipment, Pitthane Ultra's versatile application methods ensure a consistent, high-quality finish across any substrate.\u003c\/p\u003e","brand":"PPG","offers":[{"title":"Default Title","offer_id":45510520996010,"sku":"PPG95-8000\/01K","price":154.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0582\/4371\/1146\/files\/PitthaneUltraGlossUrethaneNeutral95-800101KitWEB.jpg?v=1770314547"},{"product_id":"pitthane-ultra-aliphatic-urethane-white-component-a-95-8000-01-1-gallon-1","title":"Pitthane Ultra Aliphatic Urethane White Kit - 95-8001\/01 - 1 Gallon Kit","description":"\u003ch1\u003ePitthane Ultra Aliphatic Urethane – White 1 Gallon Kit\u003c\/h1\u003e\n\u003ch2\u003eHigh-Build Semi-Gloss Protection with Exceptional Color \u0026amp; Gloss Retention\u003c\/h2\u003e\n\u003ch3\u003eTwo-Component Acrylic Urethane for Industrial \u0026amp; Commercial Applications\u003c\/h3\u003e\n\u003cp\u003ePitthane Ultra 95-8001 is a complete two-component aliphatic urethane kit engineered for demanding industrial and commercial coating projects. Formulated as a high-build semi-gloss finish, it delivers a durable, long-lasting topcoat with delayed chalking onset — keeping surfaces looking sharp and protected long after application.\u003c\/p\u003e\n\u003cp\u003eEasy to apply by brush, roller, or spray, Pitthane Ultra offers a longer pot life for relaxed application and a fast dry time to keep projects moving. \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh-build semi-gloss finish\u003c\/strong\u003e — delivers a durable, attractive topcoat with delayed chalking for long-term appearance retention\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFast dry time\u003c\/strong\u003e — dry to handle in approximately 5.5 hours, or just 55 minutes with accelerator\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLonger pot life\u003c\/strong\u003e — extended working time for larger surfaces and complex application conditions\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExcellent color \u0026amp; gloss retention\u003c\/strong\u003e — aliphatic urethane chemistry resists UV degradation and color fade\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVersatile application\u003c\/strong\u003e — brush, roll, or spray for flexibility across project types and surface profiles\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLow VOC formula\u003c\/strong\u003e — 2.8 VOC rating meets requirements for many industrial and commercial environments\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003eKit includes Part A (Resin) and Part B (Hardener). Refer to the Pitthane Ultra Technical Data Sheet for mix ratios, recoat windows, and substrate preparation requirements.\u003c\/em\u003e\u003c\/p\u003e","brand":"PPG","offers":[{"title":"Default Title","offer_id":45510568837290,"sku":"PPG95-8001\/01K","price":163.16,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0582\/4371\/1146\/files\/PitthaneUltraGlossUrethaneWhite95-8001KitWEB.png?v=1770316158"},{"product_id":"ppg-sigmashield-880","title":"PPG SIGMASHIELD 880","description":"\u003ch1\u003ePPG Sigmashield 880 – High-Build Epoxy Coating for Extreme Corrosion Protection\u003c\/h1\u003e\n\u003ch2\u003eSingle-Coat, Long-Term Protection in the Harshest Marine \u0026amp; Offshore Environments\u003c\/h2\u003e\n\u003ch3\u003eTwo-Component Polyamine Adduct-Cured Epoxy – 5 Gallon Kit\u003c\/h3\u003e\n\u003cp\u003ePPG Sigmashield 880 is a two-component, high-build polyamine adduct-cured epoxy engineered for outstanding corrosion resistance under the most extreme conditions. Formulated for rapid immersion service, Sigmashield 880 continues to cure after seawater immersion — making it the go-to coating for offshore splash zones, tidal structures, and subsea applications where conventional coatings simply can't keep up.\u003c\/p\u003e\n\u003cp\u003eSurface tolerant and abrasion resistant, Sigmashield 880 can be applied to wet blast or ultra-high-pressure water-cleaned substrates — damp or dry — and delivers long-term protection in a single coat. From offshore power projects to buried pipelines and marine superstructures, this is the epoxy built for environments that demand the most.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eRapid immersion capability\u003c\/strong\u003e — continues to cure after seawater immersion, ideal for tidal zones and offshore splash areas\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSingle-coat, long-term protection\u003c\/strong\u003e — high-build formula delivers full corrosion protection in one application\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutstanding seawater resistance\u003c\/strong\u003e — engineered for continuous exposure in marine and offshore environments\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSurface tolerant\u003c\/strong\u003e — suitable for wet blast or UHPWW cleaned substrates, damp or dry\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAbrasion \u0026amp; corrosion resistant\u003c\/strong\u003e — withstands mechanical wear and aggressive chemical exposure\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCathodic protection compatible\u003c\/strong\u003e — resistant to well-designed CP systems and suitable for exterior buried pipe applications\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBroad chemical resistance\u003c\/strong\u003e — splash and spill resistance to fuels, solvents, alkalis, crude oil, jet fuel, and more\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003eSupplied as a two-component system: Part A (Base\/Resin) and Part B (Hardener\/Curing Agent) Sold Seperately. Please call to order. Refer to the PPG Sigmashield 880 Technical Data Sheet for mix ratios, DFT specifications, and substrate preparation requirements.\u003c\/em\u003e\u003c\/p\u003e","brand":"PPG","offers":[{"title":"Default Title","offer_id":47901697704106,"sku":"PLEASE CALL TO ORDER","price":463.35,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0582\/4371\/1146\/files\/PPGSIGMASHIELD880WEB_b48739ce-f28a-4aa0-8638-a5ac631929fa.png?v=1768866301"},{"product_id":"ppg-urethane-accelerator","title":"PPG Urethane Accelerator 97-722\/08","description":"\u003ch1\u003ePPG Urethane Accelerator – Faster Cure, Professional Results\u003c\/h1\u003e\n\u003ch3\u003eEngineered for High-Performance Polyurethane Coatings\u003c\/h3\u003e\n\u003cp\u003ePPG 866M 97-722 Accelerator is a clear, one-component urethane accelerator designed to significantly reduce the curing time of polyurethane coatings while maintaining a workable pot life. Whether you're applying protective topcoats, industrial finishes, or specialty urethane systems, 866M integrates seamlessly into your workflow — delivering faster turnaround without compromising application quality.\u003c\/p\u003e\n\u003cp\u003eFormulated for professional-grade coating projects, PPG 866M enhances efficiency at every stage — from application to final cure — making it the go-to additive for demanding coating environments.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFaster cure times\u003c\/strong\u003e — dramatically reduces drying and cure windows to keep projects on schedule\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWorkable pot life\u003c\/strong\u003e — maintains application flexibility so you don't sacrifice quality for speed\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOne-component formula\u003c\/strong\u003e — simple to use with no complex mixing ratios\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCrystal-clear finish\u003c\/strong\u003e — won't affect the color or clarity of your urethane topcoat\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBroad compatibility\u003c\/strong\u003e — works with a wide range of PPG polyurethane coating systems\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eImproved project efficiency\u003c\/strong\u003e — fewer delays between coats means faster job completion\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"PowerCOAT Canada","offers":[{"title":"Default Title","offer_id":48353254637738,"sku":"PPG97-722\/08","price":60.2,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0582\/4371\/1146\/files\/PPGUrethaneAccelerator97-722WEB.png?v=1779902814"},{"product_id":"ppg-urethane-accelerator-97-722-08","title":"PPG Urethane Thinner 97-735\/01","description":"\u003ch1\u003ePPG Urethane Thinner 97-735  Optimized Flow for Professional Coatings\u003c\/h1\u003e\n\u003ch2\u003eA High-Performance Solvent Blend for Urethane Coating Systems\u003c\/h2\u003e\n\u003ch3\u003eFormulated for Brush, Roll, and Spray Applications\u003c\/h3\u003e\n\u003cp\u003ePPG Thinner 50-48 (97-735) is a premium solvent blend engineered to optimize the application properties of compatible urethane coatings. Designed to enhance flow and leveling, this thinner helps achieve a smooth, professional finish across a wide range of painting and coating projects — whether applied by brush, roller, or spray.\u003c\/p\u003e\n\u003cp\u003eBy adjusting viscosity to suit your specific application method and environmental conditions, PPG 97-735 ensures proper film build, consistent appearance, and reliable curing performance from start to finish.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eImproved flow \u0026amp; leveling\u003c\/strong\u003e — eliminates brush marks and surface imperfections for a flawless finish\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eViscosity control\u003c\/strong\u003e — dial in the perfect consistency for brush, roll, or spray application\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBroad environmental compatibility\u003c\/strong\u003e — performs reliably across varying temperature and humidity conditions\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProper film build\u003c\/strong\u003e — helps achieve target dry film thickness and coating appearance\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupports correct curing\u003c\/strong\u003e — facilitates full performance of the urethane coating system\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEquipment-friendly\u003c\/strong\u003e — suitable for cleaning application tools after use with compatible coatings\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"PowerCOAT Canada","offers":[{"title":"Default Title","offer_id":48353610399914,"sku":"PPG97-735\/01","price":93.45,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0582\/4371\/1146\/files\/PPG97-735ThinnerWEB.png?v=1779922435"},{"product_id":"ppg-thinner-at911-01","title":"PPG Thinner AT911\/01","description":"\u003ch1\u003ePPG Thinner AT911 – Slow-Evaporating Acrylic Reducer for Demanding Conditions\u003c\/h1\u003e\u003ch2\u003eEngineered for Warm Weather and Extended Pot Life Applications\u003c\/h2\u003e\u003ch3\u003eOptimized for Spray, Brush, and Roll – 1 Gallon\u003c\/h3\u003e\u003cp\u003ePPG Thinner AT911 is a slow-evaporating acrylic solvent designed to maintain workability and extend pot life in warm, dry, or high-temperature environments. When fast-evaporating thinners cause premature drying, orange peel, or application issues, AT911 gives you the open time needed to achieve a smooth, professional finish without rushing the job.\u003c\/p\u003e\u003cp\u003eCompatible with PPG acrylic topcoat and basecoat systems, AT911 is the preferred reducer when ambient conditions demand a slower solvent — keeping your coating flowing correctly from first pass to final coat.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eExtended pot life\u003c\/strong\u003e — slows evaporation rate to maintain workability in hot or dry conditions\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eImproved flow \u0026amp; leveling\u003c\/strong\u003e — reduces orange peel and surface defects caused by rapid solvent flash-off\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTemperature-optimized\u003c\/strong\u003e — formulated for use in warm ambient conditions where standard thinners fall short\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eViscosity control\u003c\/strong\u003e — fine-tune coating consistency for spray, brush, or roll application\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible with PPG acrylic systems\u003c\/strong\u003e — works seamlessly with PPG acrylic topcoats and basecoats\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProper film build\u003c\/strong\u003e — supports target dry film thickness and uniform coating appearance\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1-gallon format\u003c\/strong\u003e — right-sized for single-job or smaller-scale coating applications\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"PowerCOAT Canada","offers":[{"title":"Default Title","offer_id":48360027193514,"sku":"PPGAT911\/01","price":42.65,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0582\/4371\/1146\/files\/PPGAT91101WEB.png?v=1780092844"},{"product_id":"ppg-duraprep-prep-400-08","title":"PPG Duraprep 400\/08 Water Based Overspray Remover","description":"\u003ch1\u003ePPG Duraprep Prep 400 – Professional Surface Cleaner \u0026amp; Degreaser\u003c\/h1\u003e\n\u003ch2\u003eThe Essential First Step for a Flawless Coating Bond\u003c\/h2\u003e\n\u003ch3\u003eWax, Grease \u0026amp; Contaminant Removal Before Every Coat\u003c\/h3\u003e\n\u003cp\u003ePPG Duraprep Prep 400 is a professional-grade surface cleaner and degreaser formulated to remove wax, grease, silicone, and other surface contaminants before applying coatings. Proper surface preparation is the foundation of any high-performance finish — and Prep 400 ensures your substrate is clean, dry, and ready to bond.\u003c\/p\u003e\n\u003cp\u003eCompatible with a wide range of PPG coating systems, Duraprep 400 is the trusted pre-application cleaner for anyone who demands adhesion, durability, and a finish that lasts.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eRemoves wax \u0026amp; grease\u003c\/strong\u003e — eliminates surface contaminants that cause adhesion failure and fisheye defects\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSilicone \u0026amp; oil removal\u003c\/strong\u003e — cleans residues that compromise coating performance and longevity\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eImproves adhesion\u003c\/strong\u003e — prepares the substrate for maximum coating bond strength\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFast-acting formula\u003c\/strong\u003e — cleans efficiently without leaving residue or requiring excessive scrubbing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible with PPG systems\u003c\/strong\u003e — recommended prep cleaner for use with PPG topcoats, primers, and specialty coatings\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProfessional results\u003c\/strong\u003e — the critical prep step that protects your coating investment from the ground up\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"PowerCOAT Canada","offers":[{"title":"Default Title","offer_id":48364130336938,"sku":"PPGPREP400\/08","price":19.1,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0582\/4371\/1146\/files\/Duraprep40008WEB.png?v=1780340961"},{"product_id":"ppg-duraprep-788-01","title":"PPG DURAPREP 788\/01","description":"\u003ch1\u003ePPG Duraprep 788 – Solvent-Based Surface Cleaner for Maximum Adhesion\u003c\/h1\u003e\n\u003ch2\u003eProfessional Wax \u0026amp; Grease Remover Before Priming and Topcoating\u003c\/h2\u003e\n\u003ch3\u003eThe Critical Prep Step That Makes Every Coating Perform\u003c\/h3\u003e\n\u003cp\u003ePPG Duraprep 788 is a high-strength, solvent-based wax and grease remover engineered to thoroughly clean surfaces before priming, sealing, or topcoating. Contaminants like wax, silicone, oil, and road film are invisible to the eye but devastating to coating adhesion — Duraprep 788 eliminates them completely, giving your coating system the clean foundation it needs to bond and perform.\u003c\/p\u003e\n\u003cp\u003eTrusted by coating professionals, Duraprep 788 is the go-to pre-application cleaner for metal, painted, and primed substrates where surface integrity and adhesion are non-negotiable.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eRemoves wax, grease \u0026amp; silicone\u003c\/strong\u003e — eliminates hidden contaminants that cause adhesion failure, fisheye, and delamination\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSolvent-based strength\u003c\/strong\u003e — penetrates and lifts stubborn oils, road film, and surface residues standard cleaners miss\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximizes coating adhesion\u003c\/strong\u003e — prepares the substrate for a strong, lasting bond with primers and topcoats\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReduces surface defects\u003c\/strong\u003e — prevents cratering, fisheye, and peeling caused by contaminated surfaces\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFast-evaporating formula\u003c\/strong\u003e — cleans quickly and leaves no residue, so you can move straight to priming or coating\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProtects your coating investment\u003c\/strong\u003e — proper prep with Duraprep 788 extends the life and performance of every coat applied\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"PowerCOAT Canada","offers":[{"title":"Default Title","offer_id":48364649578666,"sku":"PPGPREP788\/01","price":32.98,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0582\/4371\/1146\/files\/PPG_PREP_788_01_WEB.jpg?v=1780352460"},{"product_id":"ppg-px-7003-01-white-resin","title":"PPG PX 7003\/01 White Resin Kit  Part A and B","description":"\u003ch1\u003ePPG PX 7003 White Resin – High-Gloss Engineered Siloxane Coating\u003c\/h1\u003e\n\u003ch2\u003eEpoxy-Level Protection. Polyurethane-Grade UV Resistance. One Coating System.\u003c\/h2\u003e\n\u003ch3\u003eTwo-Part Polysiloxane Topcoat for Steel, Concrete \u0026amp; High-Corrosion Environments\u003c\/h3\u003e\n\u003cp\u003ePPG PX 7003 White Resin is the Part A component of the PSX 700 engineered siloxane coating system — a two-part polysiloxane topcoat engineered for long-term protection in the most demanding industrial and marine environments. Combining the anticorrosive strength of an epoxy with the weathering and colour retention of a polyurethane, PSX 700 delivers a high-gloss, UV-resistant finish that holds up where standard coatings fail.\u003c\/p\u003e\n\u003cp\u003eIsocyanate-free and low-VOC, PX 7003 meets stringent emissions requirements without compromising performance — making it the preferred topcoat for water towers, petrochemical tanks, bridges, wind turbines, and marine vessels exposed to aggressive corrosion and UV degradation.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eEngineered siloxane technology\u003c\/strong\u003e — combines epoxy corrosion resistance with polyurethane-grade gloss and colour retention\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh-gloss, UV-resistant finish\u003c\/strong\u003e — maintains appearance and protection in direct sunlight and harsh weathering conditions\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e100% isocyanate-free\u003c\/strong\u003e — safer application environment without sacrificing topcoat performance\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLow-VOC formula\u003c\/strong\u003e — meets stringent emissions standards for industrial and environmentally sensitive projects\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBroad substrate compatibility\u003c\/strong\u003e — applies directly over prepared steel, concrete, and inorganic zinc primers\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVersatile application\u003c\/strong\u003e — suitable for airless or conventional spray, brush, or roller application\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProven in extreme environments\u003c\/strong\u003e — trusted for water towers, bridges, petrochemical tanks, wind turbines, and marine vessels\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003eNote: PX 7003 is Part A (Resin) and requires Part B (Hardener\/Converter) to cure. Included in Kit. Always refer to the PPG PSX 700 Product Data Sheet for mix ratios and application guidelines.\u003c\/em\u003e\u003c\/p\u003e","brand":"PowerCOAT Canada","offers":[{"title":"Default Title","offer_id":48367326167210,"sku":"PPGPX7003\/01KIT","price":248.8,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0582\/4371\/1146\/files\/PPG_PSX700_White_Chat_GPT_Image.png?v=1780592873"},{"product_id":"ppg-amerlock-sealer-kit-ak-0a-03","title":"PPG Amerlock Sealer Kit AK-0A\/03","description":"\u003ch1\u003ePPG Amerlock Sealer Kit AK-0A – High-Performance Penetrating Epoxy Primer\u003c\/h1\u003e\u003ch2\u003eSurface Tolerant, Solvent-Free Epoxy Sealer for Steel, Concrete \u0026amp; Existing Coatings\u003c\/h2\u003e\u003ch3\u003eUniversal Epoxy Primer That Bonds Where Others Won't\u003c\/h3\u003e\u003cp\u003ePPG Amerlock Sealer AK-0A is a high-solids, solvent-free penetrating epoxy primer sealer engineered for maximum adhesion on challenging substrates. Its unique wicking action penetrates rusted steel and concrete surfaces, creating a strong bond even where abrasive blasting isn't an option. Surface tolerant and compatible with damp surfaces, Amerlock Sealer is the go-to primer when conditions aren't ideal but performance can't be compromised.\u003c\/p\u003e\u003cp\u003eAs a universal self-priming epoxy, it accepts a broad range of topcoats and serves as an excellent tie coat over most existing coatings — making it equally valuable for new construction and maintenance recoating projects. NSF Standard 61 certified for valve applications (US supply), low VOC, and built for long-term protection in chemically aggressive environments.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePenetrating wicking action\u003c\/strong\u003e — bonds into rusted steel and concrete surfaces for exceptional adhesion at the substrate level\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSurface tolerant\u003c\/strong\u003e — suitable for applications where abrasive blasting is not an option; compatible with damp surfaces\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSolvent-free, high solids formula\u003c\/strong\u003e — low VOC with minimal environmental impact and reduced applicator exposure\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUniversal tie coat\u003c\/strong\u003e — excellent adhesion over most existing coatings and accepts a broad range of topcoats\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChemical splash \u0026amp; spill resistance\u003c\/strong\u003e — good resistance to a wide range of industrial chemicals for long-term protection\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNSF Standard 61 certified\u003c\/strong\u003e — approved for valve applications in potable water systems (US supply only)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWide colour range\u003c\/strong\u003e — available in multiple colours to suit project specifications and topcoat compatibility requirements\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cem\u003eComplete two-component kit. Refer to the PPG Amerlock Sealer Technical Data Sheet for mix ratios, surface preparation requirements, and topcoat compatibility guidelines.\u003c\/em\u003e\u003c\/p\u003e","brand":"PPG","offers":[{"title":"Default Title","offer_id":48373725888682,"sku":null,"price":364.96,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0582\/4371\/1146\/files\/AmerlockAK-0A03ClearSealerKitWEB.png?v=1780542907"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0582\/4371\/1146\/collections\/Amerlock2400WhiteResinKitWEB_1df9ce60-73f4-4b53-8da3-c164dee0a071.png?v=1778876748","url":"https:\/\/powercoatcanada.com\/collections\/ppg.oembed?page=2","provider":"PowerCOAT Canada","version":"1.0","type":"link"}